Tunze Osmolator 3, 3154 - auto top off

New: Tunze Osmolator 3

Straightforward and safe water level controller for fresh and sea water with optical control sensor and independent thermal safety sensor. A constant water level keeps the salt concentration constant in seawater aquariums. Incl. Turbelle® High Jet 5030 dosing pump with integrated dry running and blockage protection, magnet holder, 12V DC power supply unit, tube and tube holder. Suitable for placement in cabinet filter systems or on the edge of the aquarium. The sensor holds on glass panes up to 15 mm (0.59”) and the tube holder up to 22 mm (0.87”).

The large, precise optical sensor...
detects the water level with an accuracy of 0.5 mm, resists air bubbles, deposits and scratches. The independent thermal safety sensor stops the Turbelle® High Jet 5030 pump in the event of overfilling, ensuring 100% overflow protection.

Plug & Play
All required components are ready for installation in the package (except reservoir). No software setup required. The fixed parameters are based on many years of experience.

Includes Turbelle® High Jet 5030
Long-lasting high-tech dosing pump Turbelle® High Jet 5030 with a maximum delivery height of 6.2 m (20.34') and pleasantly quiet operation thanks to a real 3-phase sine wave.

High-tech cable especially for demanding aquaristics
With remarkably high abrasion resistance, seawater resistance and extreme resistance to mechanical impact. As a result, it does not harden in water like PVC cables. With an extra high-contrast intermediate cable sheathing to detect damage at an early stage.
Produced in Bavaria by MEDI Kabel.

Includes hose and hose connector
The set includes a corrosion-resistant, screw-in push-in fitting (¼ inch BSP to ø6 mm). In addition, a PU hose made entirely in Germany - low-emission, hydrolysis-resistant, microbe-resistant, flexible, does not tend to kink.

Compact all-in-one construction
With magnet holder and tube holder for an attachment to any aquarium edge or in the aquarium filter up to 15 mm (2/3").

Auto Top Off (ATO) Disclaimer

Most Auto Top Off (ATO) systems have built-in "fail safe" mechanisms; however, caution MUST still be exercised. Your ATO reservoir must hold enough water to replenish evaporation but must not contain more than your system can handle to avoid flooding.

We, nor the manufacturer, cannot be held responsible for any damages incurred.